Servicing, maintenance, repairing or replacing rear brake pads or rotors on Land Rover SUVs requires a parking brake adaptation. Also known as putting the rear brakes or parking brake into service mode. This is necessary to stay safe (avoid personal injury) and avoid damaging the vehicle you are servicing. Done fast and simply using iSCAN SF scan tool and our Land Rover diagnostic software. We are performing the adaptation on a 2018 Land Rover Range Rover Sport, most late model Land Rover SUVs will require this service.

When diagnosing, be sure vehicle is connected to a suitable power supply

Launch Diagnosis

Tap European

Tap Land Rover

Now we are going to identify the vehicle. Tap Service Function

Tap Automatic Select Model

Confirm the correct vehicle is displayed

Tap Quick Service

Tap Parking Brake Pad Replacement – Release to Service Position

Read the message, and press Enter to continue

Start engine and let idle

Press Enter to continue

Confirm the following actions have been taken, and press Enter to continue

Press Enter to begin

The parking brake will now be retracted

A warning message will be displayed in the instrument cluster

Turn ignition OFF for 10 seconds. Terminal 15 key cycle

The parking brake is now in service position. Perform repairs or maintenance as needed

To Exit Parking Brake Pad Replacement – Service Mode

Press Exit to return to the previous screen

Tap Parking Brake Pad Replacement – Exit Maintenance Mode Application

You’ll follow the same screen prompts as when entering parking brke pad replacement service mode

Always check and clear and fault codes when complete